Skip to content
Send an enquiry

Questions about stainless steel precision strip

What is precision strip?

Precision strip is cold-rolled strip with tighter limits on thickness, width and strength than standard cold-rolled strip. It is mostly supplied in thin dimensions and processed in stamping and bending lines.

What dimensions of precision strip do you supply?

We supply thicknesses from 0.01 to 1.00 mm and widths from 2 to 1,250 mm. Which thickness is possible in which width depends on grade and strength.

Which materials do you offer?

We have more than 20 materials in stock. We source many more grades on request. The range covers austenitic, ferritic, martensitic and heat-resistant steels as well as duplex. We source special alloys such as nickel and titanium on request.

What do the surfaces 2R, 2H, 2B and EDT mean?

2R is bright annealed and glossy. 2B is annealed, pickled and lightly skin-passed, so matt and smooth. 2H is work-hardened and therefore stronger. EDT is electrical discharge textured and particularly rough, with Ra above 0.50 µm.

What is the difference between a slit edge and a deburred edge?

The slit edge comes straight from the slitting line and has a fine burr. On the deburred edge this burr has been removed.

What is an traverse-wound spool?

On a spool the strip is wound layer next to layer, like thread on a reel. This fits a multiple of the length of a single coil onto one core. We supply spools up to 1,500 kg.

When is a spool worthwhile?

A spool is worthwhile if your line often stops for coil changes. In our calculation example, the number of changes falls from around 6,170 to around 510 a year.

What is an alloy surcharge?

The alloy surcharge is the part of the price that follows the cost of the alloying metals, above all nickel, chromium and molybdenum. It is set anew every month and is added to the base price.

What is the composition of V2A?

V2A is the colloquial German name for chromium-nickel steels such as 1.4301. This steel contains around 18 % chromium and 8 to 10 % nickel. The designation is not standardised. Enquiries and orders should therefore always state the material number.

What is the difference between chromium-nickel steel and stainless steel?

Stainless steel is the general term. Austenitic steels are chromium-nickel steels. Chromium and nickel alone do not determine the structure, however: duplex steels also contain both elements. There are also ferritic and martensitic chromium steels that usually contain little or no nickel and are magnetic.

Is there a minimum quantity?

The minimum quantity depends on material and thickness. We deliver from 1 kg. The single coil dimensions follow your specification.

Do you do everything yourselves?

No. We do not do everything ourselves, but we know the partner who is best at each step. Our partners are based in Germany and abroad, and in the long term we are also linked to some of them through equity holdings.

Do you also deliver abroad?

Yes, we deliver to all countries.

Which certificates do I receive with the material?

On request you receive an inspection certificate 3.1 to EN 10204 with every delivery. We work exclusively with companies that are certified to at least ISO 9001.

How quickly will I get a reply?

We usually reply within 24 hours.

What details do you need for a quotation?

We need material, thickness, width and quantity. Surface, edge, form of supply and your requested date are also helpful.

Your question was not listed

Get in touch